Complete J2534 pass thru solution, includes J2534 programmer and J2534 reprogramming assistant to guide you. Optional Wireless, OBD2 Scanner and off-board.
J2534 Programming with J2534 interface on All J2534 compliant ECUs
Increase the number of vehicles you service and expand your shops diagnostic capabilities with J2534 Reprogramming
The EASE J2534 Programming System II provides J2534 reprogramming for all J2534 compliant vehicles - virtually all 1996 and newer Domestic, Asian and European vehicles. Flash reprogramming is an important part of repairs on most 1996+ vehicles. There are now over 100 Million reprogrammable controllers on the road today. You need a system that can service them. Don’t miss out on this profitable, and quickly growing market!
Are You Ready To Start Reprogramming With Confidence? Our Reprogramming Assistant Makes Reflashing Easier
Reprogramming a vehicle controller seems like an intimidating task but it’s easier than you’d think if you have an assistant to guide you. Our exclusive J2534 Reprogramming Assistant software guides you step-by-step thru the J2534 pass thru reprogramming process. It also includes the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status and calibration. Our Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful J2534 programming event. All EASE J2534 Reflash Packages include our exclusive J2534 Reprogramming Assistant Software. It can also be purchased as an add-on for any J2534 compliant device.
Choose your J2534 Reflash Package
EASE J2534 Reflash Packages can be ordered with or without the EASE Scan Tool Software. J2534 Reflash Packages include an EASE Universal Reprogrammer Interface (URI-J2534) and the cables you need to connect to the vehicle and PC. They also include our exclusive Reprogrammer Assistant Software.
If you already have an EASE Universal Reprogrammer II Interface OR if you have a Drew Tech CarDAQ, Snap-on Pass thru Pro II or other J2534 Compliant Device, you can order EASE Add-Ons for J2534 Devices.
The EASE Reprogrammer Assistant Software and PC Scan Tool software is easy to install and use on your Windows desktop, laptop or tablet PC. (Be sure to read EASE's and the vehicle manufacturer(s)' Reprogramming PC requirements before ordering).
Please Read: Manufacturer reprogramming data subscription(s) are REQUIRED and are NOT included with EASE J2534 Reflash packages. These subscriptions can only be purchased from the OEM's website. Short term subscriptions are available. More OEM specific reprogramming information is available at nastf.org.
J2534 Reflash Package with
- Reflash any J2534 Compliant Vehicle. Includes our exclusive Reprogrammer Assistant that guides you step by step.
EASE Universal Reprogrammer II Interface, OBD II Cable, USB cable, Ethernet cable, Reprogrammer Assistant Software and one year of support.
J2534 Reflash Package
J2534 Reflash Package with
EASE Scan Tool
- Reflash any J2534 Compliant Vehicle and Perform Generic and OEM Diagnostics with this EASE Combination Package
EASE Universal Reprogrammer II Interface, OBD II Cable, USB cable, Ethernet cable, Reprogrammer Assistant Software
AND EASE OBD II Generic, Domestic & Asian PC Scan Tool Software (EASE-11) on USB Flash Drive and one year of support on both.
EASE-11 Software Combo Special
Add-Ons for J2534 Devices
- Expand the capabilities of your EASE or
ANY J2534 Device with these Add-ons
EASE PC Scan Tool Add-on
Use your J2534 Reprogrammer as a scan tool. Diagnose and reflash with same interface.
Off Board Reprogramming Add-on
Reprogram GM, Ford & Chrysler vehicle controllers on your bench top with this add-on.
EASE Reprogrammer Assistant Add-on
Perform faster and easier reflashes. Guides you step-by-step thru the reprogramming process.