Welcome to the Current Clamp Home Page. These current clamps will allow your multimeter to measure AC and DC electronic current up to 60 or 600 amperes, depending upon the model purchased. Both models have two shielded banana plugs that plug into the jacks of the multimeter. (The multimeter must have a minimum input impedance of 10k ohms). 

 

Z-PDI-CA-60 Current Clamp

AC/DC Current Clamp 10mA-60A 

This current clamp will allow your multimeter to measure low electrical and/or electronic current up to 60 amperes AC/DC with a frequency response up to 20 kHz. When measuring current with this clamp, there is no need to break a circuit. The extended measurement jaws allow users to make measurements in narrow spaces. 

Features:

  • Measures 10 mA - 60 A AC/DC current

  • Current Clamp Accuracy: +/- 1.5% to +/- 8%

  • Frequency Response: 40 Hz - 20 kHz

  • Maximum Working Voltage: 240 VAC / 300 VDC· Load Resistance: 10 k ohms

  • Uses 9 V DC battery - one is included with unit

  • Conductor opening: 9 mm

  • Overall Length: 7-3/4"

  • Manufacturer limited 2 year warranty

Part # Price
Z-PDI-CA-60 $119.00

Z-PDI-CA-600 Current Clamp

AC/DC Current Clamp 0 - 600A 

This current clamp will allow your multimeter to measure electronic current up to 600 amperes AC/DC with a frequency response up to 400 Hz. When measuring current with this clamp, there is no need to break a circuit. 

Features:

  • Measures 0 - 600 A AC/DC current

  • Current Clamp Accuracy: +/- 2% to +/- 6% plus 2A

  • Frequency Response: 50 - 400 Hz

  • Maximum Working Voltage: 480 VAC / 600 VDC

  •  Load Resistance: 10 k ohms

  • Uses 9 V DC battery - one is included with unit

  • Manufacturer limited 2 year warranty

Part # Price
Z-PDI-CA-600 $119.00

           
        

Contact Us

EASE Diagnostics
Phone 570-587-7080 or USA Toll-Free 1-888-366-EASE (3273)
Fax 570-587-7081

Copyright © 1997-2007 EASE Simulation, Inc. All rights reserved.  Information is subject to change without notice. 
All trademarks are property of their respective owners.  The display of trademarks does not imply that any license has been granted by its owner.  No trademark infringement is intended and no suggestion is made that the owner of the trademark endorses our products.

Revised: March 27, 2007